Removing Steel Shafts Broken Off Flush with Hosel      
 

One task a club repairmen may encounter is when a steel shaft has broken off flush with the top of the hosel. There are a couple of ways to solve the problem in order to reshaft the club, but the last resort is to drill the shaft out, as will be explained later.

 

  
     
There are only a few tools that will be needed to complete the task. A screw extractor (or easyout), a padded vise to secure the head, hammer, crescent wrench (or vise grip or T-handle), electric hand drill, assorted drill bits and a propane torch.  
Page: 1 2 3 4 5 >