 |
 |
|||
| Tip Trimming and Determining Bore Type | ||||
| When shafting irons, you can somewhat follow the same rule. The standard bottom of bore to groundline in irons is 1". Adjustments can be made if this measure is different than the 1" standard. If the measure is less than 1", you will trim less off the shaft; equal to how much less than 1" the measure is. If the measure is more than 1", you will trim that much more from the shaft than the trimming instructions apply.
Hopefully this tip will help to clarify tip trimming measurements. Remember, any time that you have questions, feel free to call us at 800-367-8912 or 800-321-4833 or check us out on the Forums at www.hirekogolf.com; we'll be happy to be of help! by Jeff Summitt |
||||
| Page: < 1 2 3 | ||||
 |
|
|
|
|